HYDRAULIC IMPACT WRENCH/DRILL
Hydraulic Impact Wrench/Drill Stanley Hydraulic Impact wrenchs for underwater use are designed for the toughest underwater bolting applications. The rugged design incorporates an integral motor and heavy-duty mechanism for the rigors of track maintenance use. The power-to-weight ratio of these products is un-matched by any impact wrench on the market in their class.
MODELS
- ID07
- IW12
- IW16
- IW24
HYDRAULIC GRINDER
The Stanley GR29 is a right angle grinder that can be used for grinding and cleaning in underwater applications with a variety of wheels, brushes and attachements.
Features:
Features of the Stanley Right Angle Grinder
- Stainless steel spools and fasteners
- Oversized trigger with guard for diver comfort
- 3200 rpm @ 12 gpm
- Adjustable wheel guard for multiple positions
HYDRAULIC HAMMER DRILL
The feathering on/off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Ski I hex carbide tipped drill bits and is capable of drilling a 2" diameter hole up to 29" deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts.
Hydraulic Cut-Off Saw
The CO23 Cut-Off Saw is a hydraulic powered saw for dimensional cutting of metal, concrete, rock, masonry and coral. It has a high torque gear motor and 10" blade capacity for abrasive and diamond wheels with a 1" arbor.
Hydraulic Chipping Hammer
The ergonomic “D” handle and short 17" overall length, makes it easy to use in confined and hard to access locations. The floating trigger design requires minimal pressure across any part of its surface to engage the tool. The trigger is protected within the handle to prevent accidental operation of the tool. The CH15 has a solid bit retainer and will accept .580 hex shank, oval collar tool bits.
MODELS
- CH15
- CH18
Hydraulic Chain Saw/Diamond Chain Saw
The Stanley GR29 is a right angle grinder that can be used for grinding and cleaning in underwater applications with a variety of wheels, brushes and attachements.
Features:
Features of the Stanley Right Angle Grinder
- Stainless steel spools and fasteners
- Oversized trigger with guard for diver comfort
- 3200 rpm @ 12 gpm
- Adjustable wheel guard for multiple positions
HYDRAULIC FLANGE SPREADERS
These spreaders use mechanical and hydraulic principles for separating flanges and can spread small, medium or large flange joints. Tool selection is made on the basis of the access gap between the flange faces, the flange size and the required scope of work.
HYDRAULLIC NUT SPLITTERS
The CO23 Cut-Off Saw is a hydraulic powered saw for dimensional cutting of metal, concrete, rock, masonry and coral. It has a high torque gear motor and 10" blade capacity for abrasive and diamond wheels with a 1" arbor.
SURFACE SUPPLY HPP FOR ENERPAC TOOLS
Model :UTS EHPP 700 Maximum Operating Pressure:10,000 psi / 690 Bar Maximum Flow at Rated Pressure: 0,55 l/min Motor Voltage: 380-415V Motor Hertz: 50/60Hz Motor Phases: 3 Ph Cylinder Compatability:Single Acting Valve Function: Advance & Retract Valve Operation: Solenoid Power Source: Electric Weight: 117Lbs / 53Kg
75 KW HPP FOR RUNNING SUBSEA TOOLS & UMBILICAL WINCHES
Specifications
Power Rating - 100HP
Flow Rate – Max flow rate 137L/min @ 1800rpm
Pressure – Max pressure set @ 250Bar
Oil Tank - 600 Litres
Dimensions – L 2440 x H1830 x W1220mm
Gross Weight – 2.5 Tons
Features:
Features of the Stanley Right Angle Grinder
- Stainless steel spools and fasteners
- Oversized trigger with guard for diver comfort
- 3200 rpm @ 12 gpm
- Adjustable wheel guard for multiple positions
UMBILICAL WINCH WITH 150M OF 1/2:” AND ¾” HYDRAULIC HOSE. WP 3000 PSI
SPECIFICATIONS
Capacity – 150m Twin Hose Umbilical
Max Pull – 1000KG
Flow - 15 – 60L/MIN
Pressure – 200Bar
Connection – 6m Hose C/W Q.D Coupling
Weight – 1500Kg Tare, 3000Kg Gross
Dimension – 1770 x 1770mm
Drum Dimensions – Core:800mm, Flange 350mm, Width: 800mm
Certification – Certificates for Hoses, MPI on Skid & Load test on Slings, Shackles and Frame
CHUTE FOR OVERBOARD FOR UMBILICAL WINCH AND TOOLS HYDRAULIC HOSES. BEND RADIUS 2.8M
The CO23 Cut-Off Saw is a hydraulic powered saw for dimensional cutting of metal, concrete, rock, masonry and coral. It has a high torque gear motor and 10" blade capacity for abrasive and diamond wheels with a 1" arbor.
